This 96W 24V non-dimmable plug-in driver is built for professional use in dry, indoor commercial applications. It provides a steady output with Class 2 and Level VI certification, supporting safety and efficiency. The plastic housing is lightweight and easy to handle, while integrated protection features ensure reliable operation. Install is quick with standard 18AWG input/output leads. With a 1-year warranty and 50,000-hour rated life, it’s a solid choice for LED lighting and low-voltage systems.

Built to Class 2 and Type HL standards and cULus listed for dry, damp, and wet locations, this 60W hardwire driver covers 24Vdc constant-voltage installations with full five-protocol dimming support — TRIAC, 0-10V, 1-10V, PWM, and RX — in a single unit. The full-protection aluminum enclosure includes SCP, OVP, OTP, and OLP with automatic hiccup recovery, so the driver self-resets after a fault rather than requiring on-site service. At 24Vdc/2.5A, it is optimally sized for mid-run commercial strip installations on 24V systems — the preferred voltage for longer LED tape runs where voltage drop is a concern. Backed by a three-year warranty and rated for any location type.

Stepping up to 96W while maintaining a Class 2 Type HL listing, this 24Vdc hardwire driver handles larger architectural LED installations that a 60W unit cannot cover — without requiring a Class 1 installation approach. At 91% efficiency and a power factor of ≥0.95, it runs cool and draws cleanly from the 100–277Vac supply, with all five dimming modes — TRIAC, 0-10V, 1-10V, PWM, and RX — already on board. The full-protection aluminum case with automatic hiccup recovery and 8 half-inch knockouts adapts to most enclosure and conduit configurations on commercial jobsites. cULus listed, RoHS and SELV compliant, backed by a three-year warranty.

At the top of the hardwire driver range at 192W, this unit delivers two independent 24Vdc/4A outputs from a single Class 2 Type HL listed enclosure — making it the go-to choice for large-scale architectural strip installations, signage, or multi-zone commercial lighting where maximum run length and load capacity are the priority. At 92% efficiency it produces the least heat per watt in the lineup, and the ≥0.95 power factor keeps the upstream circuit clean. All five dimming protocols are built in, and the full-protection aluminum enclosure with ten half-inch knockouts and automatic hiccup recovery handles any fault condition without manual intervention. cULus E362082 listed, RoHS and SELV compliant, three-year warranty.